Load data for .30 PICRA + .308 | 150gr | RWS TMR

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| RWS TMR
Manufacturer SKU:	2422718
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B10725_C311
Last updated:	2026-03-10

Load data for 46 loads in caliber .30 PICRA with .308 | 150gr | RWS TMR bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35781	88%	**86	100%
ADI APS 350	<<locked>>	62%	36158	89%	**43	100%
Accurate 4100	<<locked>>	71%	35926	88%	**65	91%
[Accurate No. 11 FS]*	<<locked>>	79%	35839	88%	**81	84%
Alliant 2400	<<locked>>	68%	35926	88%	**65	94%
Alliant BLUE DOT	<<locked>>	71%	36361	90%	**48	99%
Alliant Herco	<<locked>>	71%	36390	90%	**11	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	73%	35723	88%	**15	100%
[Hodgdon H110]*	<<locked>>	75%	35737	88%	**94	88%
Hodgdon LilGun	<<locked>>	76%	36042	89%	**27	94%
Hodgdon TrailBoss	<<locked>>	97%	26223	65%	**8	100%
Maxam CSB 1	<<locked>>	64%	36448	90%	**52	100%
Ramshot Enforcer	<<locked>>	68%	36318	89%	**78	95%
ReloadSwiss RS 14	<<locked>>	97%	25628	63%	**4	100%
ReloadSwiss RS 30	<<locked>>	92%	35969	89%	**30	92%
SNPE Vectan BA6 1/2	<<locked>>	93%	35868	88%	**75	97%
SNPE Vectan BA7 1/2	<<locked>>	65%	36085	89%	**40	100%
[Somchem S265]*	<<locked>>	83%	35824	88%	**48	87%
Vihtavuori 3N38	<<locked>>	67%	36216	89%	**19	100%
Vihtavuori N105	<<locked>>	70%	36027	89%	**29	100%
Vihtavuori N110	<<locked>>	85%	36347	90%	**94	95%
Vihtavuori N32C Tin Star	<<locked>>	79%	36506	90%	**63	100%
[Winchester 296]*	<<locked>>	75%	36216	89%	**07	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	27398	67%	**58	100%
ADI APS 350	<<locked>>	60%	34824	86%	**33	100%
[Accurate 4100]*	<<locked>>	61%	25541	63%	**88	85%
[Accurate No. 11 FS]*	<<locked>>	74%	29675	73%	**83	81%
Alliant 2400	<<locked>>	61%	28645	71%	**53	91%
Alliant BLUE DOT	<<locked>>	61%	27151	67%	**98	96%
Alliant Herco	<<locked>>	61%	28805	71%	**09	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	60%	26397	65%	**7	100%
[Hodgdon H110]*	<<locked>>	64%	24700	61%	**88	80%
[Hodgdon LilGun]*	<<locked>>	61%	21234	52%	**45	84%
Hodgdon TrailBoss	<<locked>>	75%	18275	45%	**0	100%
Maxam CSB 1	<<locked>>	61%	34171	84%	**22	100%
Ramshot Enforcer	<<locked>>	61%	28253	70%	**47	91%
ReloadSwiss RS 14	<<locked>>	71%	16665	41%	**3	100%
[ReloadSwiss RS 30]*	<<locked>>	76%	22916	56%	**75	81%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	15040	37%	**1	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	32300	80%	**91	100%
[Somchem S265]*	<<locked>>	71%	25585	63%	**78	81%
Vihtavuori 3N38	<<locked>>	61%	29776	73%	**30	99%
Vihtavuori N105	<<locked>>	61%	27601	68%	**07	100%
[Vihtavuori N110]*	<<locked>>	61%	17651	43%	**37	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	25179	62%	**9	100%
[Winchester 296]*	<<locked>>	69%	29486	73%	**99	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data